2nd PRINTING DEC 99
EMERGENCY CALL
AMBULANCE
KIT VERSION (ROM SET)
OWNER’S MANUAL
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-0858
MA_ADD
ROM CHANGE INSTRUCTIONS
SEGA Service Department
45133 Industrial Drive
Fremont, Ca. 94538
Phone: 415.701.6580
Fax: 415.701.6594
EMERGENCY CALL AMBULANCE
Before starting work be sure to turn power off. Failure to observe this can
cause electric shock and short circuit hazards.
Use care so as not to damage wirings. Damaged wirings can cause electric
shock or short circuit accidents.
This work should be performed by the Locations Maintenance Man or
Serviceman. Performing work by those who do not have technical expertise
can cause electric shock accident, or damage to the Game Board
KIT INSTALLATION INSTRUCTIONS:
1.) Turn power off & Disconnect all plugs from the Game Board Cage.
2.) Remove Cage and open Case Lid.
3.) Remove (12) phillips screws and remove the PCB from Cage.
4.) Remove (4) phillips screws and nuts that secure Security Board to CPU
Board. Remove Security Board.
5.) Install new Security Board and secure with the (4) philips screws previously
removed; DO NOT OVER TIGHTEN!
6.) Remove each of the (41) E-Proms and Mask Roms from the Rom Board. Be
careful not to scratch the Board or break sockets.
7.) Install new E-Proms and Mask Roms. Be careful not to damage IC by static
electricity. Be careful not to bend pins while inserting E-Proms and Mask Roms.
8.) Re-install Game Board into cage, then replace cage into cabinet. Reconnect
all connectors.
9.) Power On Game and test for proper operation. Set all game options.
Please see diagrams on the following page for E-PROM and ROM layout.
If you have any questions please contact the SEGA Service Department at the numbers given above.
[ CURRENT E-PROM AND MASK ROM LAYOUT ]* Your game board may differ from the one pictured below
[ NEW EMERGENCY CALLAMBULANCE E-PROM AND MASK ROM LAYOUT ]
* Items that are marked with and asterick are not provided with this kit, but may be purchased through your SEGA
authorized parts dealer for your game.
COMPOSITION OF GAME BOARD (game board not included)
Ensure that the DIP SW setting is performed as designated as designated. Failure
to observe thisw may cause functioning not suitable for tyhe operation, or mal-
functioning.
ASSY CASE EMERGENCY CALL AMBULANCE (998-0341)
VISIT OUR WEBSITE!
|
PYLE Audio TV Mount PSW116MF1 User Guide
Radio Shack Model Vehicle 60 2810 User Guide
Radio Shack Surge Protector 61 2429 User Guide
Ricoh Printer DDST A, DDST B User Guide
Rockford Fosgate Stereo Amplifier PUNCH 4020 DSM User Guide
Ryobi Trimmer UT15703A User Guide
Samsung All in One Printer SF 530 Series User Guide
Sanyo Camera Accessories RC 3600HV User Guide
SATO Printer D508 User Guide
SeaLand Indoor Furnishings 711 M28 User Guide